22
If an alarm is triggered, the following happens:
- The green bar in the ShaPoLi home screen will change to red
- The ShaPoLi tab and Alarms tab will change to red and blinks
- The normally closed Digital Output is opened
- The speaker of the VAF Bridge Panel PC beeps for half a second, every second
- The SDB-3 software starts logging
Alarm Log:
All alarms will be logged in the Alarm log submenu. In the Alarm log all previous alarms are listed and
can be scrolled vertically. Also the status of the Alarms are visible. For example, when an Alarm is
Silenced and accepted, and the Alarm is still active, this will be displayed in the Alarm menu.
To Next Page
Loading...