VAF instruments T-SENSE - Cable Specifications

13
6.4 CABLE SPECIFICATIONS
Specification for the input, output and power supply cables connected to the PEM4 touch screen.
Figure 6 – Specification of input and output cables at the stator control box and PEM4 touch screens
Cable specification:
IC-01 Integrated antenna cable 5m, VAF supply
IC-02 Integrated stator cable 5m, VAF supply
IC-04 Power supply (115 / 230 VAC) cable, 3 x 1,5 mm
2
, flex strands
IC-05 Power supply (24 VDC) cable, 1x2x0,5 mm
2
, flex strands
IC-11 Connection cable Ethernet, CAT5e, Braid Shielded, RJ45
Remark:
When a TT-Sense
®
Thrust & Torque sensor is installed it can be connected in the same
way as above mentioned T-Sense
®
equipment.