17
7.5.3.1 Settings menu, torque inversion
Figure 10 – Settings menu, torque inversion
When the touch screen is showing a negative torque value, when sailing ahead, you are able to
convert this negative value to positive by pushing the “Standard” button once. “Standard” will now
change to “Inverse”. Pushing “Inverse” will change the button back to “standard” again.
7.5.3.2 Settings menu, clock
Figure 11 – Settings menu, clock
7.5.3.3 Settings menu, Ethernet settings
Figure 12 – Settings menu, Ethernet settings
In this menu it is possible to change the Ethernet settings of the stator control box. Via “Get settings”
the current settings are shown.
Remark:
Please double check changes before pressing changing settings. Incorrect settings might
cause malfunctioning of the complete system.
To Next Page
Loading...