Vahterus Plate - Spare Parts; Special Tools; Packing and Storage

48 49
7 Spare Parts / Special Tools
Openable heat exchanger:
¬ Flow directors
¬ Plate pack
¬ Gasketbetweenthecoverplateandange
¬ Guide bars
These parts can be supplied when the exchanger serial number is provided.
8 Packing and Storage
The equipment is supplied checked and packed on the manufacturing site. After deliv-
ery, please check that the packaging and equipment have not been damaged during
transportation. Check that the gasket remains on the sealing face between the cover
plateandange.IfanydamageisfoundpleasecontactVahterus,aswellasthetrans-
port company responsible for the shipment.
Each heat exchanger leaves the factory in a sturdy wooden box. The boxes are made
from Finnish pine harvested in a sustainable forest.
The wood is free from quarantine pests and other injurious pests. The wood is ISPM15
compliant and supplied with the following saw-mill stamp.
Fig. 6. Standard packing
Fig. 7. IPPC-stamp for wooden boxes. The packing materials are recyclable into energy or other uses.