7 Maintenance
12 Instructions for use auroFLOW plus 0020160592_00
6.2 Live Monitor
Menu → Live Monitor
– This function allows you to display the current product
status of the solar system. The display also shows the
meaning in plain text.
– The display is automatically updated if the product status
changes.
Status code Meaning
400 Module in standby
401 Solar circuit being filled
403 Cylinder completely charged
405 Heating zone being charged
406 Process water zone being charged
407 Pool or second cylinder being charged
408 Frost protection active
410 Module shut down
411 Cylinder charging starting
413 Cylinder being charged
6.3 Displaying contact data
Menu → Information → Contact details
– If the competent person has entered their telephone
number during the installation, you can read the data un-
der Contact data.
6.4 Displaying the serial number and article
number
Menu → Information → Serial number
– Serial number shows the serial number of the product,
which the competent person may require you to tell him.
– The article number is found in the second line of the
serial number (seventh to sixteenth digits).
6.5 Displaying operating hours
Menu → Information → Operating hours
– Under Operating hours, you can display the number
of operating hours of the cylinder charging pump since
start-up.
6.6 Setting the language
Menu → Basic setting → Language
– During installation, the competent person has set the de-
sired language for you. If you want to set a different lan-
guage, you can do this using the menu point mentioned
above.
6.7 Setting the date/time and summer time
Note
The date, time and automatic summer/winter ad-
justment can only be set if there is no system con-
troller connected.
Menu → Basic setting → Date
– You can use this menu point to set the date.
Menu → Basic setting → Time
– You can use this menu point to set the time.
Menu → Basic setting → Summer/winter time
– You can use this menu point to set the DIA to switch
automatically between summer time and winter time.
6.8 Setting the display contrast
Menu → Basic setting → Display contrast
– This function is used to adjust the display contrast to
ensure that the display can be read easily.
7 Maintenance
7.1 Servicing the solar system
Danger!
Risk of injury and material damage due to
incorrect maintenance and repairs.
Failure to carry out maintenance, or in-
correctly completed maintenance, may
adversely affect the operational reliability of
the solar system.
▶ Never attempt to carry out maintenance
work or repairs on the solar system your-
self.
▶ Always employ a competent person.
Permanent operational readiness and safety, reliability and
a long working life require inspections and maintenance
work to be carried out annually on the solar system by an
approved competent person.
Regular maintenance ensures maximum efficiency and eco-
nomical operation of the solar system
We recommend signing up to a maintenance contract.
7.2 Caring for the product
Caution.
Risk of material damage caused by un-
suitable cleaning agents.
Unsuitable cleaning agents can damage the
casing, the fittings or the operator control
elements.
▶ Do not use sprays, scouring agents, de-
tergents, solvents or cleaning agents that
contain chlorine.
To Next Page
Loading...
