Do you have a question about the Vaillant ecoTEC pure and is the answer not in the manual?
Model | ecoTEC pure |
---|---|
Category | Heater |
Efficiency Rating | A |
Output Range | 25-30 kW |
Warranty | 2 Years |
Mounting | Wall-mounted |
Fuel Type | Natural Gas |
ErP Rating | A |
Flue Options | Horizontal or Vertical |
Type | Combination Boiler |
Classification of warnings by danger severity.
Defines the product's proper and improper usage.
Covers general safety advice and specific risks like gas leaks.
Addresses risks related to product modifications, combustion air, corrosion, and frost.
Emphasizes safety during maintenance and repairs to prevent injury or damage.
Guidelines for using, storing, and understanding the validity of product documentation.
Overview of the product's physical design and its control elements.
Explains the product's display symbols and details on the identification plate.
Information regarding product serial numbers and CE compliance markings.
Explains how to operate the product using buttons and the display.
Describes the basic display status and different user access levels.
Steps for opening isolator devices and switching the product on for operation.
Instructions for adjusting heating flow and hot water temperatures.
Procedures for deactivating functions and checking heating circuit pressure.
Steps for filling the heating system and putting the product into standby mode.
How to protect against frost, drain, detect faults, and interpret status codes.
Guidelines for regular maintenance and proper cleaning of the product.
How to interpret maintenance messages and check the condensate drain system.
Procedures for temporarily or permanently taking the product out of service.
Details the conditions and requirements for the manufacturer's guarantee.
Provides contact information for customer service and technical support.
Details the settings and options available at the operator level.
Lists and explains various status codes displayed by the product.
Provides guidance on diagnosing and resolving common product issues and rectifying faults.