Val Controls IHP24-BF - Page 41

DHP-UM-013
Val Controls A/S • Limfjordsvej 3 • DK-6715 Esbjerg N • Tel. +45 7547 0600 • Fax +45 7547 0611
vc@valcontrols.com • www.valcontrols.com
Revision: 4
41/58
LO_PRI
[Alarm]
29
Length 1 byte
Read Write
Value: 0
Description: Priority of the low alarm
LO_LIM
[Alarm]
30
Length 4 bytes
Read Write
Value 1 #INF
Description: The setting for low alarm in engineering
units
LO_LO_PRI
[Alarm]
31
Length 1 byte
Read Write
Value: 0
Description: Priority of the low low alarm
LO_LO_LIM
[Alarm]
32
Length 4 bytes
Read Write
Value: -1. #INF
Description: The setting for low low alarm in
engineering units
HI_HI_ALM
[Others]
33
1: Unacknowledged
Length 1 byte
Read Write
2: Alarm state
Length 1 byte
Read Only
3: Time stamp
Length 8 bytes
Read Only
4: Sub code
Length 2 bytes
Read Only
5: Value
Length 4 bytes
Read Only
Description: The status for high high alarm and its
associated time stamp.
HI_ALM
[Others]
34
1: Unacknowledged
Length 1 byte