Val Controls IHP24-BF User Manual

DHP-UM-013
Val Controls A/S • Limfjordsvej 3 • DK-6715 Esbjerg N • Tel. +45 7547 0600 • Fax +45 7547 0611
vc@valcontrols.com • www.valcontrols.com
Revision: 4
8/58
4.1 Transducer block
Transducer Block (MTB)
Analogue and Digital input and output parameters are stored in the MTB Transducer Block.
This block is the linking the Hardware and the Fieldbus Analogue and Discrete Input and Output
functions.
Values in this block should not be changed.

Val Controls IHP24-BF Specifications

General

Brand	Val Controls
Model	IHP24-BF
Category	Valve Positioners
Language	English