39
EN
Useful information
C
a. To make the water circulate without the filter, place a
large tray in front of the lter.
b. Turn and loosen the pump filter (counter-clockwise) until
water starts to flow. Let the water drain into the tray you
have placed in front of the lter. Keep a piece of cloth handy
to absorb any spilled water.
c. When the water in the machine has been drained, pull out
the lter completely by turning it.
4. Clean all residue from inside the filter, as well as any
bres around the impeller.
5. Replace the lter.
6. If the lter cap is made up of two parts, close it by pressing
the tab. However, if the appliance consists of a single part,
first install the labels in their positions in the lower section
and then press on the upper section to close.
To Next Page
Loading...
