38
EN
Useful information
C
WARNING :
• Foreign bodies left in the pump lter can damage your
machine or cause it to make noises.
• When not in use, turn o the tap, remove the inlet hose and
drain the water inside the machine to prevent freezing.
• After each use, turn o the machine's water supply tap.
To clean the dirty lter and drain the water:
1. Unplug the machine to disconnect the power supply.
WARNING : The temperature of the water in the machine can
go up to 90°C. Clean the lter after the water inside the machine
has cooled to avoid any risk of burns.
2. Open the loading door.
3. Follow the steps below to drain the water.
If the product does not have a drain hose, in an emergency,
follow these steps to drain the water :
To Next Page
Loading...
