valent VX Series Reference Guide

Valent VX Series Controller14
Main Menu Navigation
Unit Enable
Main Status Ctrl Variables Alarm Menu
Unit Status
Temp Control
Alarm History
Input Output Status
Dehumidification
Active Alarms
Note:
Additional status screens
are displayed depending
on unit configuration.
Screens may include, but
are not limited to:
Occupancy
Damper positions
Fan status
Airflow
Set Points
Economizer
Energy recovery
Cooling
Circuit pressure
Heating
Dehumidification
Static pressure
Refrigeration
Compressor Control
Reset History
Pressure Control
Clear History
Heat Pump Control
Export History
Damper Control
Energy Recovery
Fan Control
Supply Fan Control
Exhaust Fan Control
Occupancy
Advanced
Note:
The Advanced
menu is read-
only. The service
password is
required to change
these settings.
Reference the
Advanced menu
section for more
information.
*Consult
factory for more
information.
Login
Manual Overrides
Adv. Set Points*
PID Tuning*
Network Settings
Backup/Restore
IO Status/Offset*
IO Config
Unit Config*
Service Config
Factory Config
Unit Settings*
Service Info*
Alarm
Management
Shutdown
Alarms
General
Alarms

valent VX Series Specifications

General

Brand	valent
Model	VX Series
Category	Air Handlers
Language	English