Valentine VMC-3 - Troubleshooting Guide; Common Simple Faults; Complex Fault Diagnosis

Date de création: 11.04.07 Edition 06.01.2017
Date de modif 15.07.2015 MM Version A
Fichier VMC-3-ENC_E_A déf.doc
Fabrique SA
Doc. No.: VMC-3-ENC_E
Page No.: 9 / 13
Troubleshooting
Simple faults
Faults
Probable cause
Solutions
Multicooker does not heat up
● No power
 Check fuses, plug and
socket carefully
The Multicooker does not heat up and the red
lamp is On
● The security thermostat has
activated
 See NOTE page 6 / 10
Multicooker does not get hot enough
● One phase missing in power
supply
 Check fuses
Clear pilot lamp does not come on or flashes
● Faulty bulb
● One phase missing in power
supply
 Change bulb
 Check fuses
Yellow pilot lamp does not come on or flash-
es
● Faulty bulb
 Change bulb
Complex faults
Faults
Probable cause
Solutions
Pilot lamps are on but the Multicooker does
not heat up
● Faulty heating element
 Call after-sales Service
Multicooker does not get hot enough
● Phase failure
● Faulty element
Fuses blow on switching on
● Short-circuit
The neutral lamp does not come on or flash-
es
● Faulty switch
The orange lamp does not come on or flash-
es
● Faulty thermostat