Valet System One User Manual

11
Changing Room Station Coding
For the purpose of Select Calling (Calling individual or grouped stations) each station must be
allocated a number between 1 and 8 (Single digit) or 11 and 38 (Double digit). If more than one
station is allocated the same number, the stations having the same number will form a group.
Allocating a number to a station, is done by means of programming via the keypad.
Single Digit
Enter a number between 1 and 8 by pressing the corresponding button
The Red LED will repeatedly flash the programmed number while in program mode
Double Digit
Enter a number in the ranges of 11 to 18, 21 to 28 or 31 to 38
The Red Led will quickly flash twice, then flash the first digit and then flash the
second digit.
This sequence will continue to flash while in program mode
Exit Program Mode
Exit program mode by pressing the “CLEAR” button

Valet System One Specifications

General

Brand	Valet
Model	System One
Category	Intercom System
Language	English