Safety Decals Valmar
3 – Safety Decals
Safety Decals
Keep safety decals clean and legible at all times. Replace decals that are missing or have become
illegible. Safety decals are available from the Valmar Parts Department.
Safety Decal Installation
• Be sure the installation area is clean and dry.
• Decide on the exact position before removing the backing paper.
• Remove the smallest portion of the backing paper.
• Align the decal over the desired area and press the small portion of the decal into place.
• Remove the remainder of the backing paper and press the entire decal in place.
• Pierce any air pockets and smooth them out.
Familiarize yourself with the location and message of all safety decals on these pages.
1
2
3
To Next Page
Loading...