44
6. The machine is ready for use with instructions in
the selected language.
Press the BACK button to return to the previous screen.
Press the HOME button to cancel the operation and return to the HOME
screen.
8 PROGRAMS
Each program consists of steps (the number of the step you can see - check in
additional active screen – chapter 7.1.7) and if the program permitted (custom
programs) you can SET in:
• each step:
o Mixing speed (if the button racket and snail is grey the changing is not
allowed – see chapter 7.1.5);
o Mixture temperature (if the button up and down is grey the changing
is not allowed - see chapter 7.1.6);
o Maintenance time (if the button up and down is grey the changing is
not allowed - see chapter 7.1.6);
Exemple: Program custom (pasteurize)
Program is composed from 6 steps:
• Step 1: heating of the mixture to 45°C;
• Step 2: heating of the mixture to 85°C;
• Step 3: maintenance of the mixture at 85°C;
• Step 4: cooling of the mixture to 40°C;
• Step 5: cooling of the mixture to 4°C;
• Step 6: maintenance of the mixture at 4°C.
After starting ( , , , , , ) the program you can change (if
the program permitted) in:
• each step (other programs through the and button):
o temperature of the mixture (active program parameters screen);
o maintenance time (active program parameters screen);
and through the and button:
o mixing speed (active program parameters screen).
The changing is valid only for actual step and is autosaved for all the time. If we
want to change the one of the following step you must wait until the machine
start the desired step!
To Next Page
Loading...
Need help?
General
