18. SERVICING & PARTS REPLACEMENT 38
18.1 To remove the trim. 38
18.2 To remove the visual baffle. 39
18.3 To remove the window door panel. 39
18.4 To remove the fuel effect and ember wool 39
18.5 To remove the top tray. 40
18.6 To remove the base tray. 40
18.7 To remove the burner assembly and tray 40
18.8 To access and remove the Inspection panel 40
18.9 Checking the aeration settings of the burners 40
18.10 To remove the wall liners 41
18.11 To remove the pilot unit. 41
18.12 To remove the Mertik GV60 gas valve. (RC) 42
18.13 To remove the Teddington gas valve and switch. (FS) 43
18.14 To remove the receiver box. (RC) 43
18.15 To remove the thermocouple interrupter block. (RC) 44
18.16 To replace the burner (s). 44
18.17 To remove the burner injector. 44
18.18 To remove the appliance from the fireplace. 44
CONTENTS (Continued)
Section Page
Page 7
© GDC Group Ltd. NOV 2017
INSTALLER GUIDE