Why does my Valore VS2001 Bathroom Fixtures shower drip continuously?
If your Valore Bathroom Fixtures shower drips continuously, it might be due to dirt or sedimentation on the valve seat, or a damaged shut-off unit. Try cleaning or replacing the shut-off unit to resolve this issue.
How to fix limited water flow in Valore VS2001?
If you're experiencing limited water flow with your Valore Bathroom Fixtures, it could be due to inadequate supply pressure. Check the water pressure, and if a pump is installed, ensure it's working correctly. Another possible cause is dirty filter gaskets. Try cleaning the filter gasket between the shower and hose.
What to do if the temperature of Valore Bathroom Fixtures does not correspond with the temperature set?
If the output temperature of your Valore Bathroom Fixtures does not match the temperature set, it could be due to the thermostat not being adjusted. Please contact the supplier to adjust the thermostat. Alternatively, the hot water temperature might be too low. Try resetting the high-temperature limit stop.
General| Brand | Valore |
|---|---|
| Model | VS2001 |
| Category | Bathroom Fixtures |
| Language | English |
Describes advanced features like the thermostatic mixer, high-quality hydro jets, and deluxe hand shower.
Specifies maximum operating pressure, recommended pressure, temperature limits, and flow rate.
Details how to operate the temperature control knob for desired water temperature and safety features.
Outlines the procedure to verify and calibrate the water temperature output for safety.
To Next Page
