Van Norman FG5000 - Standard Equipment; List of Standard Parts and Descriptions

5000/10000 FLYWHEEL GRINDER
STANDARD EQUIPMENT — FG5000/ FG10,000
ITEM PART # DESCRIPTION
1 794-8010-64 Centering Cone Bolt 1.875" (47.6 mm)
2 794-8010-65 Centering Cone Bolt 2.375" (60.3 mm)
3 794-8010-66 Centering Cone Bolt 3.375" (87.8 mm)
4 794-8010-72 Centering Cone 1"-1.75" (25.4-44.5 mm)
5 794-8010-74 Centering Cone 1.312"-2" (33.3-50.8 mm)
6 794-8010-76 Centering Cone 1.75"-2.5" (44.5-63.5 mm)
7 794-8017-93 Centering Cone 2"-2.625" (50.8-66.7 mm)
8 794-8010-78 Centering Cone 2.25"-3" (57.2-76.2 mm)
9 794-8010-80 Centering Cone 2.75"-3.5" (69.9-88.9 mm)
10 794-8010-90 Flange Adaptor 3" (76.2 mm)
11 794-8010-92 Flange Adaptor 4" (101.6 mm)
12 794-8010-94 Flange Adaptor 5" (127 mm)
13 794-8010-97 Flange Adaptor 5.875" (149.2 mm)
14 794-8124-71 Wheel Spacer 1.5" (38.1mm)
15 794-8011-28 Grinding Wheel 4" (101.6 mm) Flaring Cup
16 794-8011-12 Grinding Wheel 6" (152.4 mm) Flaring Cup
17 794-8011-30 Grinding Wheel 6" (152.4 mm) Flaring Cup
18 794-8011-88 Lower Wheel Flange
19 794-8017-44 E-Z Lok Inserts (2)
20 794-8011-52 Leadscrew Lubricant
21 794-8011-40 Coolant Additive, 1 Qt (.946 liter)
22 794-8011-55 Table Lubricant, 2 Qts (.946 liter)
23 794-8033-21 Leveling Bolts (4)
24 000-1035-35 Leveling Bolt Lock Nuts (4)
25 794-8030-58 Leveling Pads (4)
26 794-8639-45 E-Z Lok Insert Extractor
27 794-8013-73 Table Oil Level Gage
28 794-8017-32 T-Handle Hex Wrench
29 794-8017-37 Wrench Set
30 000-0170-60 Wheel Mounting Bolt, 2.75"
31 000-0170-55 Wheel Mounting Bolt, 2.50"
32 000-0170-35 Wheel Mounting Bolt, 1.25"
33 000-0170-27 Wheel Mounting Bolt, 1.00"
34 794-8013-12 O-Ring
Van Norman 6. 888-855-1789