Van Rysel XCR - Technical Specifications

4
TECHNICAL SPECIFICATIONS
FRAME KIT
FRAME VAN RYSEL XCR
FORK VAN RYSEL XCR
SEATPOST VAN RYSEL XCR
AVAILABLE SIZE XS / S / M / L / XL
HANDLEBAR VAN RYSEL XCR BASE BAR 0mm
FORK SIZES XS / S / M / L / XL
HEADSET
HEADSET BEARINGS 49mm LOWER BEARING & 41,8mm UPPER BEARING
COMPRESSION RING XCR COMPRESSION RING
WHEEL SIZE
MAXIMUM TYRE WIDTH (measured) 700x30C MEASURED
OPTIMAL AERODYNAMICS (measured) 700x25C
BOTTOM BRAKET PRESSFIT BB86
BOTTOM BRACKET SHELL DIAMETER 41mm
BOTTOM BRACKET SHELL WIDTH 86.5mm
DROPOUT AND AXLES
FRONT DROPOUT STANDARD 12X100mm
FRONT AXLE LENGTH 118mm
FRONT AXLE THREAD PITCH P1,0
REAR DROPOUT STANDARD 12X142mm
REAR AXLE LENGTH 164mm
REAR AXLE THREAD PITCH P1,0
SEAT POST
SIZES S : 200mm / S-M : 215mm / L-XL : 290mm
SEATPOST MINIMUM INSERTION 80MM
HANGERS
FRONT DERAILLEUR HANGER BRAZE-ON
REAR DERAILLEUR HANGER STANDARD OR DIRECT MOUNT
GEARING
Chainring size 1X MIN 46T MAX 58T
CHAINRING 2X SMALL CHAINRING MIN 34T MAX 44T
CHAINRING 2X BIG CHAINRING MIN 50T MAX 58T (60T OK if speci󰘰c set up)
CASSETTE SMALLEST SPROCKET SIZE 10T-14T
DRIVETRAIN COMPATIBILITY
electronic groupset only
SHIMANO ULTEGRA & DURA ACE DI2 12S
SRAM ROAD RIVAL, FORCE & RED AXS
BRAKES
Front brake FLAT MOUNT 140 / 160mm
Rear brake FLAT MOUNT 140 / 160mm