www.vanco1.com
800.626.6445
3
INTRODUCTION
The Evolution by Vanco EVEXKVM1 HDMI Extender over Single Cat5e/6 with KVM, auto EDID/EQ, and PoE extends high
denition video and audio signals, KVM (Keyboard, Video, Mouse) signals, and power at a distance of up to 164ft/50m
over a single Cat5e/6 cable. KVM capability using USB 2.0 allows for controlling a security NVR/DVR, computer, NAS
system, or any other component that is controlled by USB with this extender. No need to run a separate line or extender
just for KVM control! Also features Power over Ethernet (PoE) Technology, which transmits power over Cat5e/6, allowing
either the Transmitter or Receiver to be powered without the use of a power supply. No EDID or EQ adjustments are
necessary as the units automatically adjust for compatibility and gain. This product fully supports DTS-HD and Dolby
TrueHD audio formats, and is HDCP compliant. For extending HDMI over a single Cat5e/6 with KVM at a long distance,
with Power over Ethernet, the EVEXKVM1 is a great plug and play solution for any device that needs to be extended and
controlled with a keyboard and mouse!
The EVEXKVM1 includes two units: transmitting unit (EVEXKVM1-TX) and receiving unit (EVEXKVM1-RX). The transmitting
unit is used to capture the HDMI input with KVM signals and carries the signals via one cost effective Cat5e/6 cable. The
receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing KVM signals. The EVEXKVM1
offers the most convenient solution for HDMI extension over a single Cat5e/6 with Power over Ethernet, and is the perfect
solution for any application.
FEATURES
HDMI® Extender with KVM
Part # EVEXKVM1
• Transmits audio and video via HDMI as well as complete KVM (Keyboard, Video, Mouse) functionality via
USB 2.0 ports over a single Cat5e/6 up to 164ft/50m with POE.
• Power Over Ethernet (PoE), integrates power into the Cat5e/6 cable, requiring no power supply for either
the Transmitting unit or Receiving unit (opposite of unit that is plugged in to power)
• Auto EDID management automatically adjusts to overcome compatibility issues
• Auto EQ distance for perfect transmission and reception of HDMI signals
• Supports up to 1920x1080 @ 60Hz resolutions
• Transmission Range: Extends HDMI signals up to 164ft/50m over a single Cat5e or Cat6 cable
• Extends USB 2.0 high speed at 480Mbps to 164ft/50m
• RX unit provides 4 USB 2.0 high speed ports at display end
• USB ports allow for charging of connected USB devices (please use properly certied and licensed
cabling with utilizing the charging feature)
• RX integrated with Hi-Fi USB audio card, supports analog passive earphone and microphone access
• VESA DDC and hot swap technology (HPD)
• Compatible HDMI 1.3/DVI 1.0
• HDCP 1.4
• Dimensions: 3.25” W x .8” H x 3.6” D
To Next Page
Loading...
Need help?
General
