www.vanco1.com
800.626.6445
5
CONNECTION DIAGRAM
CONNECT AND OPERATE
1. Connect HDMI cable from a source into the HDMI IN port of the transmitter
2. OPTIONAL: Connect the provided IR BLASTER into the IR OUT port of the transmitter
3. Connect a HDMI cable from the HDMI OUT port of the receiver to a display or sink device
4. OPTIONAL: Connect the provided IR RECEIVER into the IR IN port of the receiver.
5. Power on and test
NOTE: Transmission distance may be different and that certain environmental factors such as external
wireless signals can interfere with transmission. Walls, brick, or glass can signicantly shorten the product’s
range at higher resolutions.
To Next Page
Loading...
Need help?
General
