To Next PageTo Next PageWhat to do if the air from my vanEE 40H+ 44253 is too cold?
If the air is too cold at the air supply grille of your vanEE Fan, you can try the following: 1. Check to see if the exterior hood is blocked. 2. Operate the unit at a low speed, intermittently, or in recirculation mode (if this feature is available). 3. Consider installing a duct heater.
How to troubleshoot a vanEE 40H+ 44253 Fan that isn't working?
If your vanEE Fan isn't working, check if the unit is properly plugged in and confirm that the house circuit breaker or fuse is providing power to the unit.
What to do if the air is too dry when using my vanEE 40H+ 44253 Fan?
If the indoor air is too dry when using your vanEE Fan, consider temporarily using a humidifier. You might also try operating the unit in recirculation mode, if available.
Describes the basic control interface with a push button and LED indicator.
Details the advanced wall control with mode selection, preferences, and program settings.
Explains the operation modes and humidity settings for the Deco-Touch control.
Covers the operation modes and suggested uses for the Lite-Touch Bronze control.
Describes the push-button operation modes for the Simple-Touch Bronze control.
Details the air supply control and dehumidistat adjustment for the Bronze control.
Explains the function of optional timers and dehumidistats for enhanced control.
Provides step-by-step instructions for cleaning filters and the unit core every three months.
Outlines the annual cleaning procedures for the recovery core and exterior hoods.
General