Quick Bridge Setup for Beginners
Loosen the strings a bit, to ensure enough space under the strings for setting the
bridge. Tighten the head if it is loose and make sure the sound of each side of the
head is the same so that the head tension is the same.
The bridge string notches have been precisely cut for strings with various thicknesses.
Examine the bridge to find the largest slot, which corresponds to the wound (4th) string.
Once you have the bridge oriented properly, lift the strings up and slide the bridge, on
its side, underneath the strings. Stand the bridge upright, parallel to the frets.
03
Step 1:
Step 2:
To Next Page
Loading...