Vante SEBRA MINI 2380 - Figure 4-1, Properly Removing the Battery Using the Strap; Figure 4-2, Properly Removing the Battery by Sliding

P/N VT-108723-US, Manual revision: C Vante
®
SEBRA
®
MINI
™
Tube Sealer Power Source
18
Pull on the
strap.
Battery should
slide out of
device when
removing.
Figure 4-1, Properly Removing the Battery Using the Strap
Device is held
at a downward
angle.
Battery should
slide out of
device when
removing.
Figure 4-2, Properly Removing the Battery by Sliding
3. Install a fully charged battery pack as described in Chapter 3.