7. LCD Display Function
Temperature Display
Thermometer HDD Indicator
Fan State Indicator Fan RPM Fan Settings
Thermometer
When critical temperatures are reached, the thermometer will flash.
Fan State Indicator
When the fan isfunctioningproperly,the fan state indicatorwill have a spinning
motion. When the fan is working improperly, the fan state indicator will flash.
,
Temperature of the hard drive will be displayed in either °C and of.
Temperature Display
(Press "Button + " and" Button - " at the same time to switch between 'c or
OF
state.)
Fan RPM
This displays current RPM of your fan.
Fan Settings
There are three choices. L (Low speed/2300RPM) ,
M(Medium speed/3600RPM), H(High speed/4500RPM).
HDD Indicator
When a hard drive is inserted, the HDD indicator will be lit.
Activity is
shown by flickering or flashes.
Button
+
To increase the fan speed.
Button - To decrease the fan speed.
@NOTE:
When the temperature is over the critical safe levels of (55°C
/I
131°F)
or
if
the fan is working improperly, an alarm will sound for 10 seconds
and can be muted by pressing any of the fan control button. The alarm
will ring every 30 minutes until the
problem is resolved.
LCD Display Function
9
8. Warranty I Contact
The EZ SWAP 4 comes with a 1 year limited
warranty (90 day parts). If your unit should
become defective within that time frame, please
go to http://www.vantecusa.com for information
on how to receive warranty exchange or repair.
Cosmetic defects and missing parts are not
covered under this warranty.
Pleasecheckthe contents of the unit to makesure
you received all parts. Also, check for any cosmetic
flaws. If any parts are missing or if there are
cosmetic defects, please contact theretailer from
which you purchased the unit immediately and
askfor areplacement.
Vantec Thermal Technologies
43951 Boscell Rd.
Fremont, CA 94538
tel: 510-668-0368
fax: 510-668-0367
website: www.vantecusa.com
-I
Copyright © 2009 Vantec Thermal Technologies. All Right Reserved.
All Registered Trademarks Belong To Their Respective Companies.
Warranty
I
Contact
10