Vantrue E1 Lite User Manual

21
Note: If the camera experiences repeated impacts while in collision detection mode, it
will revert to normal recording mode and reset the 5-minute countdown. This feature
helps to ensure that the camera does not stay in collision detection mode indefinitely in
busy environments.
Motion Detection
Activating motion detection on the dash cam triggers the display of a motion icon ( )
on the screen, indicating that the camera is monitoring for any movement. This mode
offers three sensitivity settings: low, medium, and high, which correspond to detection
distances of 2 meters, 4 meters, and 6 meters, respectively.
If no movement is detected within 5 minutes of turning on motion detection, an orange
icon will be shown on the screen. Subsequently, if the camera remains idle for 3 more
minutes, the screen will power down to conserve energy. However, if the camera senses
movement or vibration, it will start recording for a period of 30 seconds.

Vantrue E1 Lite Specifications

General

Field of View	170°
Wi-Fi	Yes
G-Sensor	Yes
Loop Recording	Yes
Parking Mode	Yes
Frame Rate	30fps
Video Format	MP4
Night Vision	Yes
Screen Size	2 inch
Operating Temperature	-4°F to 158°F (-20°C to 70°C)
GPS	Optional (requires additional GPS mount, sold separately)
Storage	MicroSD card up to 512GB (not included)