- 2 -
of the main unit. Please do not install it facing
down when installing the logo side of the main
unit or under the metal parts of the motorcycle.
<2>. F1 dash cam main unit needs to be fixed with
3M adhesive (shipped as standard). Please fix the
3M adhesive in the recess of the F1 main body
protective case and then paste it to the motorcy-
cle.
<3>. In order to improve the cooling efficiency of
F1 mainframe, you can remove the protective
case before installation.
<4>. If installed on the curved surface, we
recommend using cable ties for fixing.
To Next Page
Loading...
