Vantrue F1 User Manual

- 3 -
1.3 Installing the remote control
You can choose a suitable installation position
according to your own usage habits and install
the remote control on the handlebars, the front
part of the car, the side of the fuel tank, etc.
Note :
<1>. When installing the motorcycle dash camera,
you need to face up the button side to avoid
affecting the GPS signal reception.
<2>. Please do not use 3M adhesive to cover the
speaker hole on the back of the remote control in
order to increase the stability of the remote control.
Speaker hole
<3>. The side is the microphone receiving hole,
please do not put the receiving hole directly in
front to avoid serious wind noise.
REMINDER:

Vantrue F1 Specifications

General

Brand	Vantrue
Model	F1
Category	Dash Cameras
Language	English