- 17 -- 17 -
Manually lock the video. In the video recording interface,
click the icon and the video will be locked and saved in
the event video folder.
You can set the G-sensor Sensitivity values of Forward &
Backward, Leftward & Rightward, Upward & Downward of
the car. The G-sensor value in each direction can be
selected 1/2/3/4/5/OFF. The default sensitivity for the three
dimensions is 3. The highest sensitivity of G-Sensor is 5.
Please go to “Menu Setting” > “G-sensor”, then adjust the
G-sensor value.
The interior and rear cameras can be optionally mirrored
on or off. The video files are not affected regardless of
whether it is turned on or off, just the screen display.
If your internal and rear camera is mounted upside down,
the screen will stand upside down. You can turn on this
function to flip the videos. Please go to "Internal Rotate
Display(180°)" or "Rear Rotate Display(180°)" on the “Menu
Settings” and select "On".
By default, this function is disabled.
In order to enhance the safety of parking at night, we
make full use of the lens performance combined with
low-light night vision technology to improve the night vision
effect in parking mode. This function is in open mode by
default. It will be triggered only after entering the parking
4.9 Internal & Rear Mirror
4.10 Internal & Rear Camera Flip(180°C)
4.11 Low-light Night Vision in Parking Mode
1.
2.
Note:
The camera will auto-overwrite old Event videos once the
Event folder has accumulated 30% of the card capacity.
Please regularly transfer important videos to your PC or
another storage location (e.g. external hard drive).
EN
EN
EN
EN
To Next Page
Loading...
Need help?
General
