- 5 -
The docking station perfectly connected the front, inside,
and rear cameras, making the installation of the dash cam
more convenient and flexible. The M3 dash cam comes with
a car charger and a hardwire kit. If connecting the car
charger, the dash cam will power off after the car engine is
off; if connecting the hardwire kit, the car will continue to
supply power to the dash cam in parking mode.
Reminder:
Before using the SD card, please format it to FAT32 on the
camera.
We recommend turning on the format reminder setup,
and formatting the card regularly. Too many files on the
memory card will affect its read and write performance.
1.
2.
3.2 All Accessories Installation
3.2.1 Car Charger Installation
1.
2.
3.
Connect the docking station ① to the car charger ②;
Connect the car charger ③ with the rear lens extension
cable ④;
Connect the rear lens extension cable ⑥ to the rear lens
⑦;
EN
EN
EN
EN
10
9
12
11
1 2
5
3
4
6
7
8
To Next Page
Loading...
Need help?
General
