- 6 -
1.
3.
4.
2.
3.2.2 Hardwire Kit Installation(For 24 Hours Parking Mode)
Note:
⑤ is the reversing light wire, which is connected to the
reversing light in the fuse box;
⑧ is the rear reversing light wire, which is connected to the
rear reversing light of the car.
Please connect one of the reversing light wires as needed.
Connect the docking station ① to the Hardwire kit②;
Connect the Hardwire kit ③ with the rear lens extension
cable ④;
Connect the rear lens extension cable ⑤ to the rear lens ⑥;
The hardware kit ⑦ is the same as the installation method
of the normal ACC hardwire kit:
The black wire is the negative wire, which is connected to
the metal of the car; The red line is the ACC signal line,
which is connected to the ACC fuse of the car fuse box;
4.
5.
Connect the docking station ⑨ with the M3 main dash
cam ⑩ via the TYPE-C power cable;
Plug the interior camera ⑪ into the docking station
headphone jack ⑫ .
ENEN
10
9
12
11
1 2
3 4
5
6
8
7