EasyManua.ls Logo

Vantrue Mirror M2 - Page 9

Vantrue Mirror M2
35 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Language: Adjust menu language. English, fåj($+
i, Deutsch, Italiano, Espaäol, Franqais, 93blK,
Polskie.
Date & Time: Automatically sets the time by GPS, Set the
date and time, the time system (24-hour Format by Default),
and the time zone.
Storage Space: Display Total Memory/Available Memory/-
Format SD Card
Format Reminder Setup: If this function is enabled, you are
reminded to format the micro SD card every 30 days
Resolution: Adjust front camera video quality,
1440P/1080P/720P optional. The rear camera resolution is
fixed at 1080P.
Video Frame rate: Select the video frames. 30FPS/28FPS
optional.
Loop Recording: 1min/3min/5min/OFF optional. The default
is 3 minutes. If you select "off", the looping recording is 20
minutes per clip
Video Format: TS/MP4 video format optional. Default is TS
video format.
Rear Camera Flip (1800): ON/OFF.
Audio Recording: ON/OFF. Default is ON.
G-Sensor: You can set the g-sensor values of Forward &
Backward, Leftward & Rightward, Upward & Downward of
the car. The G-sensor value in each direction can be
selected I /2/3/4/5.The highest sensitivity of G-Sensor is 5.
Parking Mode: Collision Detection, Time-Lapse recording,
and Motion Detection are optional.
Exposure: Adjust exposure valoe for the front lens,+2.0,
I I /3,+0.0,- I
optional.
Frequency: 50Hz/60Hz available. Default is 60Hz.
Device Sound: Set the volume of the device, such as the
startup sound, prompt sound, button sound, and video
playback sound. You can select off, low, Medium, or high.
The default value is Medium.
-6

Related product manuals