VAPEX TECH VTE600-Combo User Manual

VTE600-Combo
Intelligent Li-Po/LiFe Battery Pack Balance Charger Product Instructions
Thank you to choose our VTE600 Combo Charger, it is perfect balance charger for your Li-Po and LiFe 1S to 3S Batteries.
Model No.: VTE600 Combo Balance Charger
Intelligent Li-Po / LiFe Battery Pack Balance Charger (1-3 Series)
VTE600 Combo Balance Charger is special design for Lithium-ion Polymer, Lithium-ion battery or Lithium-Iron-Phosphate
(LiFePO
4
) Battery, from 1S to 3S Battery Packs. It can not be used for Ni-Cd or Ni-MH rechargeable Batteries, or Primary
Batteries.
SAVE THESE INSTRUCTIONS
Characteristics
1、 Special microcomputer controlled, ensure balance precision within 15mV.
2、 Combo charger for both Li-Po and LiFe Batteries.
3、 Build-in Power supply make it more slim and easy to take.
4、 Automatically detects and controls the voltage of each cell independently, ensures a balance voltage between
cells.
5、 Each cell’s charge situation can be clearly displayed by one corresponding LED..
6、 Input has protective function of short circuit and opposite connection.
7、 The out-off voltage of charger between 4.20±0.015V/cell for Li-Po batteries, and.3.65±0.015V/cell for LiFe
batteries
Method for Charging Rechargeable Batteries
1) Put the Plug in mains socket; the three LEDs will be BLUE when put on Li-Po Position, or GREEN when put on LiFe
position.
2) Choose the right position of the charger to charge you Li-Po or LiFe Battery. To use Li-Po function to charge LiFe
battery will be over-charge. And to use LiFe function to charge Li-Po battery will be not fully-charge. And One time
it can only charge one piece Battery.
Caution
◆ Prohibited charge with Multi-Groups Batteries at the same time!
◆ Prohibited charge LiFe Battery by Li-Po Function, the Battery maybe
too hot to Fire! To charge Li-Po Battery by LiFe Function, the battery will
not be fully charged!
3) Plug 1S~3S Battery pack into the charge port of charger; Ensure that +/- polarity is correct, or
the charger will not work, The charger may be broken.
4) Charging process will start.
When charging 1S battery, 1CELL LED will be RED. 2CELL & 3CELL LEDS will keep BLUE (Li-Po) or GREEN (LiFe).
When charging 2S Battery, 1CELL & 2CELL LEDs will be RED, 3CELL LED will keep BLUE(Li-Po) or GREEN(LiFe).
When charging 3S Battery, 1CELL, 2CELL & 3CELL LEDs will be all RED.
When the RED LEDs turns to RED/BLUE(Li-Po), or RED/GREEN(LiFe), the battery nears 80%~90% charged,
When the RED LEDs turns to BLUE(Li-Po), or GREEN(LiFe), the battery is fully charged,
5) Unplug the Battery from the charger, and unplug the plug from the mains.

VAPEX TECH VTE600-Combo Specifications

General

Brand	VAPEX TECH
Model	VTE600-Combo
Category	Battery Charger
Language	English

Summary

Save These Instructions

Product Characteristics

Details the VTE600 charger's key features, including microcomputer control, dual battery compatibility, and cell balancing.

Charging Method Overview

Step-by-step guide for connecting the charger, selecting battery type, and plugging in the battery pack for charging.

Important Safety Cautions

Highlights critical warnings, including prohibiting multi-group charging and improper battery type selection to prevent damage or fire.

Charging Process Indicators

LED Status Guide

Explains the meaning of LED lights during charging for different battery types and charge states.

Operational Notices

Provides essential advice on charger placement, heat dissipation, and power connection for optimal and safe operation.

Charge Time Estimates and Warnings

Battery Charge Time Table

Presents estimated charging times for various Li-ion, Li-Po, and LiFe battery capacities at specified charge rates.

Usage Warnings and Precautions

Details critical warnings regarding battery compatibility, handling, disassembly, and environmental exposure to prevent hazards.

Usage and Environmental Notices

Advises on indoor use, power disconnection, avoiding drops, adult supervision, optimal temperature range, and battery overcharge prevention.

Technical Specifications

Lists essential technical details including input voltage, frequency, cut-off voltages for different battery types, operating temperature, dimensions, and weight.