6 Maintenance, care and storage.
To ensure a long-term satisfaction with our product, it must be given proper care and
maintenance. Regular maintenance of the machine will prevent its early wear ensuring at the
same time a correct functioning of all its parts.
Follow all instructions for intervals of machine maintenance and for machine adjustment.
It is advised that you keep records on the number of machine working hours and on the
conditions in which the machine was working (for service purposes). Similarly as the current
maintenance, the after-season maintenance should be entrusted to one of our authorized
service workshops.
6.1 Machine lubrication.
6.1.1 Engine oil replacement.
,When exchanging oil, follow the basic hygienic principles as well as regulations and
laws on environment protection.
Information on oil replacement can be found in the instructions for use of engine.
When draining oil, either tip the machine to the side with pouring-in neck and oil gauge or
dismount the engine from the machine (see Chapter 6.4 items a),b),e) ).
6.1.2 Table of machine lubrication.
Machine lubrication During season After season Figure No.
Tightening pulley arm pin
(after disassembly of upper casing)
min 2x
yes 4.1
Mowing disk drive clutch wire
- on input to Bowden cable
- on output from adjustment bolt
min 2x
min 2x
yes
yes
Travel wheel bearings as required yes 4.2
To Next Page
Loading...
Need help?
General
