Why my Vari Lawn Mower engine does not start?
If the engine of your Vari Lawn Mower doesn't start, make sure there's petrol in the tank and that the petrol feed is open. If these steps don't resolve the issue, it may indicate another defect.
What to do if Vari Lawn Mower cutter does not move?
If the cutter on your Vari Lawn Mower isn't moving, the engine might not be running, or the wheel drive clutch lever may not be pressed. Ensure the engine is running and the lever is pressed. Also, check if the belt tightening is sufficient; if not, adjust both tightening pulleys. A broken or fallen belt could also be the cause; in that case, replace or mount the belt accordingly. If problems persist, it may be due to another defect.
How to fix Vari BDR-1200 Lawn Mower cutting discs not spinning?
If the cutting discs on your Vari Lawn Mower aren't spinning, it could be due to several reasons. First, ensure the engine is running and the disc drive clutch lever is pressed. If that's not the issue, check the belt tightening and adjust the tightening pulley if needed. A broken or fallen belt can also cause this; replace or mount the belt accordingly. If none of these solutions work, there may be another defect.
Why is it impossible to stop the Vari Lawn Mower?
If you can't stop the Vari Lawn Mower, it might be because the tightening pulley isn't returning properly. Try lubricating it. Alternatively, a tight or bent Bowden cable could be the problem; in this case, lubricate or exchange the Bowden cable. A broken wheel drive pulley spring can also prevent stopping; replace it if broken.
What to do if Vari Lawn Mower does not turn using directional brakes?
If the directional brakes on your Vari Lawn Mower aren't working, the Bowden cable might be tight or bent, try lubricating or replacing it. A loose wire could also be the cause; adjust the lever pace. If the wire is broken, replace the cable. If the lining is worn out, damaged, or greasy, it might be another defect.
Why Vari BDR-1200 brake does not work?
If the brake on your Vari Lawn Mower isn't working, it could be due to several reasons. Check for axial clearance in the Bowden cable; if the cable is tight, adjust the brake. If the cam is hard to move, lubricate it. If the brake lining has deteriorated and you cannot adjust the brake, it might be another defect.
Why Vari BDR-1200 directional brakes keep slacken up?
If the directional brakes on your Vari Lawn Mower keep slackening up, it could be due to a few reasons. The cam might not be returning properly; try lubricating the cam pin. Another possibility is a broken cable return spring, in which case you should replace the cable. A tight or bent Bowden cable could also be the culprit; lubricate or replace it as needed. If these steps don't resolve the issue, it may be another defect.
What to do if Vari Lawn Mower control levers do not come back?
If the control levers on your Vari Lawn Mower aren't returning, the brake cable might be tight or bent; try lubricating or exchanging it. Also, the return spring could be broken; replace it with a new one. If the issue persists, it may indicate another defect.
General| Brand | Vari |
|---|---|
| Model | BDR-1200 |
| Category | Lawn Mower |
| Language | English |
To Next Page
