BDR-1200
2.7 Picture appendix
The illustrated appendix is common for all language mutations. You can find it at the end of this user manual, in chapter Figures.
1) Carton packing
2) Transport palett
3) Tape for fixing the machine on palette
4) Bag containing user manuals
5) Tipped handlebars in the package (position for transport)
6) Front bumper
7) Adjustment joint of handlebars
8) Wheel drive clutch lever
Fig 1: Unwrapping the machine
1) Protective frame front part
2) Rear frame part, left
3) Rear frame part, right
4) Protective screen
5) Rear screen, right
6) Rear screen, left
7) Protective screen frame
8) Conduit clamp
9) Bolt M5
10) Nut M5
11) Flat washer, 5mm diameter
Fig. 2: Protective screen
Fig. 3: Screen frame fastener
1) Bolt M8x30 with plastic head
2) Bolt M8x25 with plastic head
3) Bolt M6x55 with plastic head
4) Nut M6 with plastic head
Fig. 4: Protective screen fastening from the front
Fig. 5: Back fastening of Protective screen
1) Machine frame
2) Handlebars
3) Double-drum cutting mechanism
4) Engine
5) Right cutting disc
6) Left cutting disc
7) Left wheel with directional brake
8) Right wheel with directional brake
9) Bumper-grip
10) Protective frame with screen
11) Disc drive clutch lever
12) Wheel drive clutch lever
13) Gear shifting lever
14) Accelerator lever
15) Left directional brake lever
16) Right directional brake lever
17) Hitch for sulky
Fig. 6: Machine main parts
Fig. 7: Hitch for sulky
1) Handlebars handle
2) Handlebars holder
3) Turnplate
4) Tightening nut - height adjustment of handlebars
5) Detent lever - side adjustment of handlebars
Fig. 8: Side and height adjustment of handlebars
31
To Next Page
Loading...
