The device described in the manual is a drum mower, specifically the VARI Agatha model, designed for cutting tall grass in gardens, agricultural areas, and communal spaces. It is a robust machine suitable for both professional and hobby use, capable of handling dense vegetation and uneven terrain. The manual emphasizes its ease of use, safety features, and durability.
Technical Specifications
The VARI Agatha drum mower is available in several models: DS-521, DS-521B, DS-521BIS, and DS-521Z. While specific details may vary slightly between models, general specifications are provided:
- Engine: The mower can be equipped with various engines, including Honda GCV170, Briggs & Stratton® 675EXI Series™, and VARI XP200A.
- Engine Power: The power output is approximately 2.74 kW.
- Maximum Engine Speed: Typically around 3200 ± 100 rpm.
- Maximum Engine Tilt (Short Period): Up to 20° or 30° depending on the model.
- Fuel Tank Volume: 0.91 liters or 1 liter.
- Oil Filling: 0.4 liters or 0.6 liters.
- Oil Quality: SAE 10W-30 / SJ or SAE 30.
- Cutting Width: 57 cm, 58.5 cm, 59 cm, or 61 cm, depending on the model.
- Cutting Disk Revolutions: 1964 min⁻¹.
- Safety Clearance: 10°.
- Travel Speed: 2.0 km/h.
- Area Capacity: 1170 m²/h.
- Gearbox Oil Capacity: 0.05 liters (GL-4 (GL-5)).
- Gearbox Oil Quality: SAE 90 (80W-90).
- Length: 1755 mm.
- Width (including side screen): 779 mm.
- Height: 1130 mm.
- Weight: 57 kg, 58 kg, 59 kg, or 61 kg.
- Guaranteed Sound Power Level LWA: 97 dB.
- Declared Vibration Value on Handlebars ahw: 6.6 + 2.6 [m.s⁻²] to 8.0 + 3.3 [m.s⁻²] depending on the model.
Usage Features
The VARI Agatha drum mower is designed for efficient and safe operation. Key usage features include:
- Starting the Engine: The mower is equipped with a starting panel that includes a switch (STOP/START), a choke lever, and an accelerator lever. The starting procedure involves setting the choke, accelerator, and then pulling the starter rope. Electric start models simplify this process.
- Cutting Operation: The cutting disk rotates at high speed to effectively cut tall grass. The machine is designed to be pushed or self-propelled, with controls on the handlebars for managing engine speed and engagement of the cutting disk and drive wheels.
- Safety Mechanisms: The mower includes several safety features, such as a safety clearance angle, protective covers, and clear pictograms on the machine to warn users of potential hazards. The manual stresses the importance of maintaining a safe distance from the rotating parts and wearing appropriate personal protective equipment (PPE), including hearing protection, safety glasses, and sturdy footwear.
- Handling on Slopes: The manual provides guidelines for safe operation on slopes, recommending caution and avoiding excessively steep inclines.
- Transport: The machine can be transported by dismounting certain parts, such as the handlebars, to reduce its size.
- Adjustable Handlebars: The handlebars are adjustable to suit the operator's height and preference, enhancing comfort and control.
- Easy Assembly: The manual provides detailed instructions for assembling the machine, including attaching the handlebars, side screens, and other components.
Maintenance Features
Regular maintenance is crucial for the longevity and safe operation of the VARI Agatha drum mower. The manual outlines a comprehensive maintenance schedule and procedures:
- Engine Oil Check and Change: The engine oil level should be checked before each use and changed according to the engine manufacturer's manual, typically after the first 5 hours and then every 20 hours or annually.
- Air Filter Cleaning: The air filter should be cleaned every 10 hours or more frequently in dusty conditions.
- Washing: The machine should be washed after each cutting session to remove grass and dirt buildup.
- Blade Sharpening and Replacement: The cutting blades should be sharpened as needed and replaced if damaged. The manual provides instructions for blade replacement, emphasizing the importance of using original spare parts.
- Belt Check and Adjustment: The V-belts should be checked for wear and tension. Proper tensioning of the belts is essential for efficient power transmission to the cutting disk and drive wheels.
- Gearbox Oil Check and Change: The gearbox oil level should be checked periodically, and the oil should be changed as recommended in the manual, typically every 20 hours.
- Tightening Bolts and Screws: All bolted connections should be checked and tightened every 5 hours to ensure the machine's structural integrity.
- Lubrication: Various lubrication points on the machine, such as bowden cables and drive pulleys, should be greased or oiled as specified in the maintenance schedule.
- Storage: Before long-term storage (e.g., at the end of the season), the machine should be thoroughly cleaned, the fuel tank emptied, and the carburetor drained to prevent corrosion. The spark plug should be removed, and a small amount of engine oil should be poured into the cylinder to protect it during storage.
- Troubleshooting: The manual includes a troubleshooting guide to help users identify and resolve common issues, such as the cutting disk not spinning, the machine not starting, or the drive not engaging.
The manual also provides information on ordering spare parts, emphasizing the use of original VARI parts for optimal performance and safety. It includes contact details for the manufacturer and links to their website for further support and product information.
To Next Page
Need help?
General
