– Carry out seasonal lubrication of the cutter according to
0%Y
.
– Check tyre pressure and fill the tyres to MAX level.
3.5.7.1 MACHINE WASHING AND CLEANING
(%% %"% % -" " & " . ""% "
"%"!
.@0%""%h-.&&
!
-."%"!
3.5.8 COVER AND MACHINE DISPOSAL AFTER ITS SERVICE LIFE TERMINATION
You are required to carry out the package disposal after unwrapping the cutter, following national waste laws and regulations.
C"&.%%"&-."."%.)
– Dismount all machine parts that can still be used.
– Empty oil from gearbox and engine into an appropriate tank and hand it in at a collection point
101
.
– Dismount plastic and coloured metals.
– You are required to carry out the disposal of the dismantled machine remainder and dismounted parts, following national waste
laws and regulations.
3.5.9 INSTRUCTIONS FOR ORDERING SPARE PARTS
This user manual does not include a list of spare parts. The latest version of our catalogue can be downloaded from our web pages. If
you do not have Internet access, you can order the catalogue in printed form (against COD). In order to identify your machine properly you
need to know its 01-, Order Number<2= and Identification Number<2=. These are given on the nameplate of your machine in the
box, or in the warranty certificate. It is only possible to find proper spare part designation with this information.
(%& "-
01-
Machine type designation:
:PML
2
Unique manufacturer Identification number:
LRRVVRRROS!RPLS!RRRRV
(product.month-and-
year.consecutive-number)
2
Business (order) number:
OOVV
0!LL)-%:a-%
3.6 MANUFACTURER ADDRESS
3Q*;!! Phone: (+420) 325 607 111 http://www.vari.cz
Main page
http://katalognd.vari.cz
Spare parts
Opolanská 350
289 07 Libice nad Cidlinou
Czech Republic E-mail: vari@vari.cz
LRL
Collection point information is given by responsible local office.
OO
Q#RSMRML
To Next Page
Loading...
