To Next PageTo Next PageWhat to do if Vari Lawn Mower is not moving?
If your Vari Lawn Mower is not moving, the issue might be with the belt tension. Try adjusting both tension pulleys. Another possibility is a torn belt, which would require replacement. Also, check if the belt has come off and re-mount it if necessary.
Why is the cutting disc not rotating on my Vari Lawn Mower?
If the cutting disc of your Vari Lawn Mower isn't rotating, it could be due to insufficient belt tension. Try adjusting the tension pulley. Alternatively, the belt might be torn and need replacement, or it may have come off, requiring you to re-mount it.
What to do if Vari Lawn Mower travel will not stop?
If the machine travel on your Vari Lawn Mower won't stop, it could be caused by a broken travel pulley spring, which should be replaced. Another cause may be a stiff inner bowden cable or a bent bowden cable. Try lubricating it, or replace the bowden cable. Also, check if the tension pulley does not return back to its position and lubricate it.
Why don't the control levers return back on my Vari Adela PRO BDR-720?
If the control levers on your Vari Lawn Mower do not return back, it could be due to a stiff inner bowden cable or a bent bowden cable. In this case, try lubricating or replacing the bowden cable. Another possible reason is a broken return spring, which would need to be replaced.
What to do if the cutting disc brake does not brake on Vari Lawn Mower?
If the cutting disc brake on your Vari Lawn Mower isn't braking, it might be because there is no axial clearance in the bowden cable, meaning the cable is stretched. Try adjusting the brake. Another possibility is that the brake key is not loose, so try lubricating it.
What to do if the engine cannot be turned OFF on Vari Lawn Mower?
If the engine of your Vari Lawn Mower cannot be turned OFF, it might be that the engine control string does not control the shortening contact. Wait for an empty petrol tank and adjust.
General| Brand | Vari |
|---|---|
| Model | Adela PRO BDR-720 |
| Category | Lawn Mower |
| Language | English |
Operator must read instructions to prevent health risks or property damage.
Explains safety symbols used in the manual for user awareness.
User must keep machine pictograms readable; replace if damaged.
Age, work aids, safety glasses, distance, blade checks, confined spaces, fuel handling.
Describes intended use for tall grass mowing in agriculture and landscape.
Provides technical specifications like dimensions, weight, working width, speed.
Details about the engine, fuel capacity, oil type, and specifications.
Lists and labels the main components of the machine.
Identifies and explains the various control levers and buttons.
Steps for checking oil/fuel, positioning levers, and starting the engine.
Procedure for safely starting the cutting disc rotation.
Steps for engaging gears and driving the machine.
How to stop the machine's movement and engine.
Guidance on operating the machine during use.
Instructions for attaching and using the Sulka trailer.
Instructions for adjusting handlebars for comfort and transport.
Explains the positions of the accelerator lever for operation.
Details on engaging and disengaging the cutting disc drive clutch.
Operation of the lever for engaging the machine's travel.
How to use the service and parking brake for slowing or securing.
Procedure for selecting gears, including neutral and reverse.
Guidance on how to position the machine for effective mowing.
Table and guidance for selecting appropriate gear speeds based on vegetation type.
Instructions for mowing tall growth and handling slopes.
Troubleshooting common mowing problems like disc speed decrease or stopping.
Lists necessary tools and optional accessories for maintenance.
Schedule of maintenance activities before, during, and after the season.
General guidance on lubricating machine parts.
Instructions for sharpening or replacing the cutting blades.
General information and inspection of V-belts.
Procedure for changing the engine oil, including recommended intervals.
How to check the transmission oil level using the dipstick.
Identifies lubrication points and intervals for various machine parts.
Information on tyre pressure and replacement.
Step-by-step guide for replacing the V-belts for wheel travel and cutting disc.
How to verify the correct function of the belt transmissions.
Instructions for adjusting the tensioning pulley for the wheel travel belt.
Steps to adjust the tensioning pulley for the cutting disc drive belt.
How to check and adjust the automatic cutting disc brake function.
Procedure for checking and adjusting the wheel brake.
