BDR-1200
2 EN User manual
Contents
2 EN User manual 18
2.1 Introduction.....................................................................................19
2.1.1 Basic warning........................................................................19
2.2 Operation safety..............................................................................19
2.2.1 Safety regulations..................................................................19
2.2.2 Noise and vibration figurese.................................................20
2.2.3 Safety pictographs.................................................................20
2.3 Basic information............................................................................20
2.3.1 Machine use...........................................................................20
2.3.1.1 Technical data..............................................................21
2.3.1.2 Engine information......................................................21
2.3.2 Description of the machine and its parts...............................21
2.4 User manual.....................................................................................22
2.4.1 Assembling the machine........................................................22
2.4.1.1 Assembling the machine – the procedure....................22
2.4.2 Adjustment of handlebars......................................................22
2.4.3 Putting into operation............................................................22
2.4.3.1 Starting up the cutting discs........................................22
2.4.3.2 Putting the machine in motion....................................23
2.4.3.3 Directional brakes.......................................................23
2.4.3.4 Machine stopping........................................................23
2.4.3.5 Mowing on slope.........................................................23
2.4.4 Work with the machine..........................................................24
2.4.4.1 Cutting width...............................................................24
2.4.4.2 Travel speed selection.................................................24
2.4.4.3 Methods of stand cutting.............................................24
2.4.4.3.1 Cutting problems ..............................................24
2.4.4.4 Sulky attachment.........................................................25
2.5 Maintenance, servicing and storage................................................25
2.5.1 Travelling wheels..................................................................25
2.5.1.1 Tyre pressure...............................................................25
2.5.2 Machine lubrication...............................................................25
2.5.2.1 Engine oil exchange....................................................25
2.5.2.2 Lubricating points.......................................................25
2.5.3 Work blades service and exchange........................................26
2.5.4 Belt transmissions.................................................................26
2.5.4.1.1 V-belt exchange.................................................26
2.5.4.2 Tightening pulleys adjustment....................................27
2.5.4.3 Checking the function of cutting disc automatic brake
and its adjustment....................................................................27
2.5.4.4 Adjustment of the wheel drive automatic brake..........27
2.5.4.5 Directional brakes adjustment.....................................27
2.5.5 Service intervals....................................................................28
2.5.6 Problems and troubleshooting...............................................29
2.5.7 Storage ..................................................................................30
2.5.7.1 Machine washing and cleaning...................................30
2.5.8 Cover and machine disposal after its service life termination
........................................................................................................30
2.5.9 Instructions for ordering spare parts......................................30
2.6 Manufacturer address......................................................................30
2.7 Picture appendix..............................................................................31
2.8 Warranty certificate.........................................................................34
The manufacturer reserves the right for engineering changes and innovations, which do not influence the function and safety of the machine. These
changes do not have to be reflected in this user manual.
Misprints reserved.
18
To Next Page
Loading...
