BDR-1200
2.5.5 Service intervals
Activity Before cutting In season Before storage
Engine oil level check yes following the engine user manual yes
Cleaning the engine air filter check every 10 hours yes
Washing - 2x yes
Removal of dirt and cut stand remains - after each cutting yes
Blades sharpening - according to need yes
Check the blades and their placing yes immediate exchange if damaged yes
Cutting discs tightening check yes - yes
Bolted connections tightening check yes every 5 hours yes
Lubrication condition check Table 6
V-belts check - every 20 hours yes
Directional brakes adjustment yes every 10 hours no
Table 7: Service intervals
28
To Next Page
Loading...
