5. Cleaning and Maintenance:
Power must be TURNED OFF while cleaning this product. The grinder body and
base must NOT be immersed or submerged in water or washed with water to
clean.
Cleaning grinder body: Please use a moist cloth/towel to wipe the body, ensure
that the cloth/towel is not wet as no water should enter the body. Ensure that
once cleaned the surfaces are dried again.
We recommend you discuss this procedure with you reseller if you are not
familiar or confident in replacing a bur set.
PLEASE NOTE that after replacing a burr set, any performance changes
to the grind settings will be as a result of an incorrect disassembly
and/or reassembly.
In this instance your warranty will not cover any additional costs
relatedto reinstating the Varia VS3 to factory grind settings
and/or performance.
VS3 Deep Clean / Burr Change Walkthrough:
A step-by-step reference video is available on YouTube
– this will assist you when completing the following tasks.
https://www.youtube.com/@variabrewing
11
To Next Page
Loading...