Varia VS3 - Product Overview; Operating Instructions

USER MANUAL
6
8
4
2
1
3
5
7
Hopper Lid (Magnetic)
Hopper
Hopper Alignment Collar
Main Body
Grounds Chute
Dosing Cup (Magnetic)
Magnetic Design Cup Dock
Power Switch
1 5
2 6
3 7
4 8
3. Product Overview
4. Operating Instructions
First use and seasoning:
WARNING: DO NOT turn on the grinder when the hopper is at its tightest
setting as you will cause damage to the burrs.
1. Remove all packaging before using.
2. Place the Varia VS3 onto a flat and stable surface.
3. Plug the adapter power cord into a power outlet and receptacle plug into
the back of the grinder.
4. Check the power is on by pressing the power button once to turn on the
motor, press again to turn off.
5. Remove the lid from the hopper and begin the calibration procedure.
– see 4.1 Grid Settings & Calibration.
07