Varifan ECS 5M - Chapter 1 - Introduction; General; Description

Page 5
1. GENERAL
This document provides a description of the ECS 5M
control panel. This document is organized as follows:
•
Introduction
• Installation
• User’s Guide
•
Appendix
1.1 DESCRIPTION
Congratulations on the purchase of your ECS 5M
environmental control system. The ECS M product line
provides you with full control over temperature, humidity,
air flow, and heat resulting in a comfortable environment
for your livestock.
The ECS 5M offer these features:
• Compatible with IPM-1 and DIP-1.
•
Hi / Lo temperature indication.
•
Automatic temperature reduction (ramping).
• Adaptable variable speed outputs for a wide selection
of fan model types.
•
Humidity probe.
• Full torque fan start preventing motor damage.
The ECS 5M provides microprocessor control over a five
stage output.
The first stage controls a variable speed fan which can
operate at a continuous low speed to ensure good quality
of air when the room temperature is below the main set
point. In addition, the first stage may be programmed to
cycle on and off. When the room temperature rises above
the main set point, the fan accelerates to increase the air
flow.
CHAPTER 1 - INTRODUCTION