EasyManua.ls Logo

Varioprop Uno S2R User Manual

Varioprop Uno S2R
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
INSTRUCTION MANUAL
ADVANCED FHSS RADIO
CONTROL SYSTEM
Question and Answer IconNeed help?

Do you have a question about the Varioprop Uno S2R and is the answer not in the manual?

Varioprop Uno S2R Specifications

General IconGeneral
BrandVarioprop Uno
ModelS2R
CategoryRemote Control
LanguageEnglish

Summary

Safety and Precautions

Warning and Safety Precautions

General terms used to indicate potential harm and safety guidelines for operating the product.

Age Recommendation

Specifies that the product is not intended for children under 14 years and is not a toy.

Product Specifications

Key Specifications

Details the transmitter features, model type, battery requirements, RF power, system type, and certifications.

Transmitter Nomenclature

Component Identification

Identifies and describes the functions of various controls and components on the transmitter.

Transmitter Controls

On/Off Switch and LED Status

Explains how to turn the transmitter on/off and interpret the LED indicator for battery status.

Throttle Control (7:3 / 5:5)

Details the proportional throttle switch for adjusting forward/reverse signal proportion.

Servo Reverse Switches

Describes the function of reversing steering and throttle servo rotation directions.

Dual Rate (D/R) Adjustment

Explains how to adjust steering sensitivity across the entire range for better control.

Transmitter Trims and Connections

Trim Adjustments

Details how to adjust steering and throttle trims for straight line movement and neutral throttle.

Receiver Connection

Provides instructions for connecting the receiver to ESC or battery and mounting the antenna.

Battery Installation and Replacement

Guides on how to install and replace the AA batteries in the transmitter, observing polarity.

Linking and Failsafe Procedures

Linking the Receiver and Transmitter

Step-by-step guide on how to link the transmitter's unique ID code to the receiver for initial operation.

Failsafe Setting

Explains the default failsafe to neutral and how to program custom failsafe settings for signal loss.

Model Operation and Adjustments

Travel Adjust Settings (EPA)

Describes how to precisely adjust endpoint settings for steering and throttle channels.

Operating Your Model

Instructions on moving the model forward, braking, and reversing using the throttle trigger.

Steering Wheel Operation

Details how to rotate the steering wheel clockwise or counter-clockwise to turn the model's wheels.

Operational Cautions and Precautions

FCC Compliance and Interference

Addresses FCC compliance, potential interference, and measures to correct reception issues.

Installation and Operational Precautions

Essential checks for secure connections, servo linkage, vibration isolation, and avoiding electrical contact.