Varioprop Uno S2R - Transmitter Controls; On;Off Switch and LED Status; Throttle Control (7:3; 5:5); Servo Reverse Switches

10 pages

To Next Page

To Previous Page

Slide UP to turn ON the transmitter

Adjust the proportion of throttle signal on either side of the centre trigger position.

Use the proportion of Forward/Reverse you prefer. We recommend using the 7:3 position for most applications.

ST.REV (Steering Reverse) :This function reverses the

rotation direction of the STEERING servo.

TH.REV (Steering Reverse) :This function reverses the

rotation direction of the THROTTLE servo.

STERRING DUAL RATE :Use this function to adjust the

steering travel of your model. If the model understeers

while cornering, add steering by turning CW of the D/R

button. When the model oversteers, take away steering by

turning CCW of the D/R button.

Slide UP for 7:3

Slide DOWN for 5:5

SOLID RED = OK

FLASHING RED = Low Voltage (Replace batteries)

ON/OFF SWITCH

SERVO REVERSE SWITCHES

7:3 / 5:5 PROPORTIONNAL THOTTLE SWITCH

LED Status

DUAL RATE (D/R)

TRANSMITTER FUNCTIONS