Varytec Razor Derby - Page 29

In this menu, you can adjust various device settings.
Press [MENU] to open the main menu.
Press [MENU] repeatedly or press [UP] and [DOWN] to select the ‘SYS’ menu and conrm with
[ENTER].
Change the currently displayed parameter with [UP] and [DOWN] and conrm with [ENTER]. To
return to the main menu without making changes, press [MENU].
Parameter Meaning Value range
‘diSP’ Automatic display blackout ‘oN’ , ‘oFF’
‘rESt’ Reset to factory defaults ‘no’ , ‘YES’
‘rEUE’ Display rotation by 180 ° ‘oN’ , ‘oFF’
‘Soun’ Behaviour if no sound signal is received
during a sound-controlled automatic show
‘LASt’ (sound control remains
active), ‘oFF’ (sound control is
turned o)
‘FAiL’ Behaviour in the event of DMX control
failure
‘bLAC’ (spotlight is turned o),
‘hoLd’ (most recent DMX
value is maintained)
‘Ir’ Sensor for the IR remote control ‘oN’ , ‘oFF’
‘diSr’ Display shuts o after 5 s ‘uo’ , ‘oFF’
System menu
Operating
Razor Derby
29
LED Eect