Varytec Razor Derby - Page 28

In this mode, the device exactly follows the operation of the master that it is connected to.
Press [MENU] to open the main menu.
Press [MENU] repeatedly or press [UP] and [DOWN] to open the ‘SLA’ menu and conrm with
[ENTER].
The display shows ‘SLAv’ , the device is now in slave mode. If the display is ashing, no master
is connected.
To return to the main menu without making changes, or to change back to an active operating
mode, press [MENU].
SLAVE mode
Operating
28
Razor Derby
LED Eect