Vasco E-Volve E-V-RF User Manual

To get an accurate estimations of the power
consumption, the radiator's power must be assigned
to the Controller, by default it is set to 500W.
Follow the steps below:
Then press 3x button and change the power
using the buttons and .
Exit the menu by pressing 3x button .
6 ESTIMATED POWER CONSUMPTION DISPLAY:
SET THE RADIATOR POWER
1 2 3 4 5 6 7
FR
NL
DE
IT
EN
PL
BINDING THE CONTROLLER WITH THE RF REMOTE CONTROL 03
I nformation display
1
Information displays
Long press 5
seconds
1
2 short
presses
2
Long press 10 seconds
4
Long press 10
seconds
3
Information display
Pro = Expert settings
10 sec.
RF pairing cancellation:
Press more than 10 seconds on
Memo button of the RF receiver
Operating status LED status and colour
Standby Off
Power on Green
Heating on Red
Boost Blinking red
Frost protection mode, open
window detection
Blinking green
Manual override (MEMO-button) Blinking orange
Operating status
RF communication status LED status and colour
Standby Off
No RF connection Red
RF pairing mode Blinking red
RF pairing cancellation Fast blinking red
RF connection OK Green
RF message received 1 sec fast blinking green
RF communication status
RF

Vasco E-Volve E-V-RF Specifications

General

Brand	Vasco
Model	E-Volve E-V-RF
Category	Controller
Language	English