08 OPERATION
5. ENERGY CONSUMPTION
A selector indicates the energy comsumption level by positioning it in front of the
colour: red, orange or green.
The gauge appears in Auto, Comfort, Eco and Frost protection modes and whatever
the temperature level.
C - Red colour
High Temperature level
Setting temperature >
22°C
When the setting tempe
-
rature is higher than 22°C
B - Orange colour
Average temperature level
19°C < Setting tempe-
rature ≤ 22°C
When the setting tem
-
perature is higher than
19°C and lower or equal
to 22°C
A - Green colour
Low temperature level
Setting temperature ≤
19°C
When the setting tempe-
rature is lower or equal
to 19°C
• Display of the estimated power consumption
To see this estimation, from Auto, Comfort, Eco or Frost protection mode,
then press .
To exit the display mode of consumption: press any button, the device is
automatically in the previous active mode.
• Resetting the energy meter
To reset the energy meter, from Auto, Comfort, Eco or Frost protection mode,
then proceed as follows.
1- Press .
2- Press simultaneously and for more than 5 seconds. To exit resetting
the energy meter, press any button, the device is automatically in the
previous active mode.